5 Inch Tungsten Coating Removing Stone Concrete Texturing Bush Hammer For Angle Grinder And Polisher, Concrete Preparation Coating Remove Tungsten Scraper For Angle Grinder(5/8-11″ Thread)

Price: $165.00
(as of May 29, 2024 05:24:47 UTC – Details)

Product Description

5 Inch Bush Hammer Tool For Concrete And Stone Texturing

5 inch bush hammer tool

5 inch/125mm plate bush hammer tool for concrete and stone texturing.

3 rollers

3 rollers, each roller with 2 star blades, each blade with 10 teeth.

overall connector

5/8-11″ or M14 threaded, overall connector design.

double paltes

double layer plates.

Star Bush Hammer Granite Texturing Effect

Different Texturing By Different Bush Hammer Roller

Star finish (CSP 2-3 Roughness)

The finish made by star roller is finer than the lichi finish. Each star roller has 2 blades, made of tungsten material.

Lichi finish (CSP 4-5 Roughness)

The lichi finish made by cone shape lichi teeth is the most coarse finish we have. It is used for surface texturing or to remove heavy coating. This finish is mostly seen outdoors to have antislip effect.

Sandblast finish (CSP 1 Roughness)

The sandblast finish is made by knurling type roller, each roller has 312 pcs teeth. This finish is the finest finish, mostly seen indoors for stairs and washroom floors.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

3.7 out of 5 stars
11

—

—

3.2 out of 5 stars
8

4.3 out of 5 stars
3

Price

$149.99$149.99 $165.00$165.00 $300.00$300.00 $140.00$140.00 $199.00$199.00

Pins
30 20 312 30 30

Plate Size
5inch/125mm 5inch/125mm 5inch/125mm 5inch/125mm 6inch/150mm

Roller Qty
3 3 3 3 4

Roller Type
Lichi Star Knurling Lichi Lichi

Finish
Lichi Coarse Sandblasting Sandblasting Lichi Lichi

Arbor Size
5/8″-11 or M14 5/8″-11 or M14 5/8″-11 or M14 5/8″-11 & SDS Max 5/8″-11 or M14

G.W/KG
2.7 1.6 1.7 2.1 3.5

Functions

1. Floor Texturing: They create a bush-hammered profile on concrete, ideal for creating anti-slip surfaces.

2. Floor Prep: They can help to increase bonding effectiveness when applying new concrete to an existing concrete surface by increasing the surface area of the bonding zone.

3. Coating Removing: Bush Hammer is applied for deep floor pulverization, especially when you expect to peel off the thick surfaces such as thick coatings, very elastic coverings, asphalt, ceramic thin-set, sanded grout, and so on, and when you expect to quickly and evenly expose aggregates

Operation Warning

1. Working Speed under 1000 RPM. Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.

2. Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.

3. Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.

4. After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.

Functions: 1. Creates anti-slip finish on granite and marble 2. Remove hard coatings and overlays 3. Increase material bonding by preparing the concrete floor with CSP 2-3 Roughness before the application of new coatings
5 Inch double plates with 3 tungsten super hard roller. Each roller with 2 pcs star blade, one blade with 10 teeth.
Adapt To Polisher Or Speed Adjustable Angle Grinder: Makita 9227CB/ 9237CB polisher is suggested with speed adjustable. Do not recommend to operate with speed too high, ideally less than 1000 RPM.
Floor coating removing and surface texturing tool for polisher and angle grinder use
Best for granite and marble floor texturing, create antislip finish on stone surface
Single 5 inch plate also available in actintool store
Warning: do not operate with too much pressure, ideally operate with speed less than 1000 RMP. Too much pressure and high speed can stop the roller from running.