Rebar Tier Tying Machine, Handheld Automatic Steel Bar Tie Tool, Tier Tying Steel Strapping, Electric Reinforcing Rebar Wire Cutter, with 2 Batteries,30-60mm

Price: $402.51
(as of Jul 14, 2024 16:32:49 UTC – Details)


●Specifications
Name: Cordless rebar tying tool
Color: Orange
Material: Plastic + Metal
Voltage: 12V
Battery Capacity: 1500 mAh
Battery Charging Time: 1.5 hours full filling
Tying Wire Diameter: 0.8mm
Tying Wire Length: more than 110 m
Applicable Scope Of Steel Strapping: 8-34mm(30-60mm)
Knot Wire Length: 300-500mm
Knot Number Per Charge: 1500 times
Knot The Required Time: 0.8 seconds at a time
Machine Size: 275 mm * 65 mm * 240 mm

●Tying Wire Installations
1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.
2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.
(Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is to disperse, it will lead to the spread of the wire stuck in the wire plate.)
3. Insert the head of the wire guide into the tap pipe until it is resisted.
4. Cover the plate and fasten the locking piece.
5. Pinch the wire forward with two fingers, press and hold the switch and send the wire out.
6. If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.

●Packing list
1X Tying Machine
1X Pliers
1X Charger
1X Storage Box
2X Batteries

●After-sales Service
As an honest international seller, customer satisfaction is our top priority. If you have any questions about the product, you can email us, we will help you within 24 hours.
【Efficient】Automatic rebar tier easily to handle, Completely automatic finish all the steps of steel bar rod banding work, The binding efficiency is increased by 2-4 times compared with the old version, and it takes only 0.8 seconds to tie a wire knot, can save 4-6 times than man power by hand. High capacity battery, Working hour last 3 hours at least.
【Easy to use】Compact size, lightweight, easy to grab. Reasonable structure, advanced craft, simple and convenient operation, convenient maintenance. Rebar Tier is a hand held machine used to pack rebars quickly. It is a miniature motor tool has the trait of safety and credibility.
【Use Instructions】The rebar tirer’s jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off). When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.
【Use Skills】In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.
【Wide Applications】Suitable for rebar tying machine in building market, replacing manual bundling of steel bars: including civil building, bridge engineering, highway tunnels, mine construction, steel bar tying, floor pipe, heating floor mesh, steel bar, etc.