RVpligo Hydraulic Hose Crimper 71500 18V 2A Electric A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool (THT.D.001)

Price: $799.99
(as of Jul 24, 2024 15:29:47 UTC – Details)


Description:
Thank you for purchasing and using the BS-71500/EZ-71500 rechargeable electrohydraulic crimping tool. This product uses high-performance lithium battery power supply, motor drive, microcomputer (MCU) control, ultra-high pressure hydraulic system, and other electromechanical integration technologies. It combines ergonomic design into one, with beautiful appearance, simple operation, large output force, super safety, and high efficiency. It is one of the best tools for your water and electricity work.

Main technical parameters
Maximum output force: 35 KN
Crimping range: 3/8-7/8 (3 to 7 minutes)
Working stroke: 15mm
Hydraulic oil: 15 # low pour point anti wear hydraulic oil, about 160ml
Ambient temperature: – 10 ℃~40 ℃
Battery: DC 18V 4Ah lithium battery
Crimping cycle: 6-12 seconds/time (depending on pipe joint size)
Crimping times per saturated battery: about 140 times (DN25)
Charging power supply: AC 100V~240V 50~60Hz
Charging time: about 2 hours

Be Careful:
1.The battery can be charged and discharged hundreds of times, but eventually it will fail. When the number of times the tool is used significantly shortens, replace the battery. Please charge the battery in a timely manner, and do not completely consume the battery, as this may cause permanent failure of the lithium battery.
2. When the tool is left unused for a long time, self discharge may occur inside the battery. The battery should be removed and kept fully charged every quarter.
3.Do not connect the two poles of the battery with wires, as this can easily cause electric sparks. Burning or even exploding.
4. Do not use a damaged battery or charge it, otherwise it will increase the risk of electric shock.
5.Under no circumstances is it allowed to incinerate the battery, otherwise it may cause an explosion.
6. When charging the batte
【High performance lithium】ion battery – Provides a stronger power source, without discharge memory effect. The ultra-low power consumption standby design can guarantee a storage time of up to 6 months, and is equipped with over discharge protection to extend the service life of the battery.
【Temperature sensor 】 The tool will generate heat when working continuously for a long time. When the temperature exceeds 60 ℃, the tool will automatically stop and give a fault prompt to protect the tool from being burned down. Only when the temperature drops can the tool continue to work.
【Microcomputer control system 】 Automatic pressure monitoring and dual safety protection during the crimping process, automatic reset and stop motor rotation after completing the crimping.
【Reset function 】 an automatic pressure relief hydraulic device that automatically resets the piston (lower mold seat) to its original position when the compression force reaches its maximum. When there is an error during the crimping process, the piston (lower mold seat) can be manually reset to its original position.
【Micro bipolar hydraulic system 】 During low pressure crimping, the piston (lower mold seat) is rapidly advanced. After the mold contacts the terminal, the piston slowly advances.