AL-460 Power Feed Z-Axis 450 in-lb Torque, 0-200RPM Rotate Speed 110V Table Milling Machine Power Feed for Bridgeport Type Milling Machine

Price: $179.99
(as of Jun 23, 2024 04:51:39 UTC – Details)

Product Description

Installation Instructions:

1.Before installation, be sure to turn off the power supply of the milling machine. Don’t install the power feed under live condition.

2.The product is supplied by AC110V 50/60Hz (Please
 prepare the required power supply for the product). If the product is used in a region not in conformity with the national power supply, please prepare a transformer, avoid using incorrect power supply and result in damage of the product.

3.The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch.

4.Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm,it is recommended to replace the two sets of carbon brushes at the same time.

Manual and Automatic Control

This multifunctional power feed for milling machine can be set to work automatically at a constant speed, or it can work by adjusting the speed adjustment knob.

High Efficiency and Low Noise

The mill power feed adopts Gleason Spiral Bevel Gear: high transmission efficiency, stable transmission ratio, long life, low noise, large arc overlap coefficient and high bearing capacity.

Simple Operation

The speed adjustment efficiency is fast. When milling, the transmission speed changes little, and the milling surface has high precision and smoothness. The machine will not shake when it is driven at low speed.

Easy Installation

This power feed can work with almost any horizontal knee type mill and other small mills with the same mounting pattern and a 5/8″ diameter shaft on the end.

Z-Axis Power Feed Kit For Milling Machine

Z-axis power feed kit is equipped with sturdy materials and precision components.

It works efficiently and quietly on equipment such as 5/8″ shaft end milling machines.

The power feed was designed with manual knobs, automatic buttons and feed reserving handles for easy operation.

This mill power feed adopts Gleason Spiral Bevel Gear, high transmission efficiency, stable transmission ratio and low noise.

This table milling machine power feed fits almost any vertical knee type mill, rocker milling machines, drilling and boring machine, and small grinders.

Specification Model: AL-460 Z-AXIS Control: Manual and Automatic Power: 90Watt, 110V ,50 / 60Hz,Single Phase Rotate Speed: 0-200 RPM Max Torque: 450 in-lb Max Feed Rate: 650mm/min Max Return Speed: 850mm/min Net Weight: 3.75kg/8.27 lbs;Product Dimension：7 x 3.5 x 11.7 INCH

【Compatible Model】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8″ diameter shaft on the end, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
【Stable performance:】When the power feeder is fast-feeding, if the tool collides with the workpiece or reverses instantly, the special safety device will prevent the transmission plastic gear and electronic components from being damaged, effectively protecting your device intact.
【High Efficiency Device】The power feed milling machine is equiped with Gleason Spiral Bevel Gear, there has the advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. In addition, when fast transmission.
【Free speed adjustment】Our handle buttons support a variety of options, easy to operate, and can freely adjust the speed according to your needs.
【Simple Operation】With small volume and easy installation, it is very easy to operate. We will send you a install instruction, it has the detail of this power feed milling machine.