BDF S4MB35 Window Film Security and Sun Control 4 Mil Black 35 (Medium) – 60in X 25ft

Price: $132.99
(as of Apr 22, 2024 22:53:18 UTC – Details)

Product Description

Aside from providing additional protection and shielding, our security films help deter smash and grab attacks by either delaying a would-be thief or by thwarting his efforts outright. Additionally, when installed in automotive windows, our security films can prove invaluable for the protection they provide against shattered glass in case of an accident. Due to their unmatched clarity, Buy Decorative Film security films provide outstanding protection without obstructing your visibility. – Available in Black 5/20/35/50, and Silver 15.

PROTECT YOUR LIFESTYLE

Protect your lifestyle from unwanted damages with Buydecorativefilm’s Security and Privacy 4 Mil S4MB35 window film. Its 4 mil thickness allows the film to serve as a protective layer once applied to your window. The S4MB35 can absorb impact from break-in attempts and hold shattered glass together in case of breakage. Perfect for ground-level rooms that are easily approachable by unwelcomed passersby.

Protect from unwanted damages Medium Shade 2 ply & 4 mil Thickness Absorb Impact from Break-in Attempts Perfect for Ground-Level Windows

EXCELLENT PRIVACY DURING THE DAYTIME

SMB35 provides a good method of promoting daytime privacy. Even though the film allows some light to pass through, the darkness makes it difficult for unwanted eyes to see what’s happening inside. An important note, however, is that the effect of any reflective, privacy enhancing window film will greatly depend on the lighting conditions because the side exposed to more light will become more reflective and harder to see through. This is why the privacy-effect works so well during the day, and almost not at all at night since the sun usually makes the exterior of your building much, much brighter than the interior.

Provides Daytime Only Privacy Medium Shade 2 ply & 4 mil Thickness Cut 28% of Total Solar Energy Curtains or Blinds are Needed for Nighttime Privacy

PROTECT FROM SHATTERED GLASS & UV RAYS

Good for homes and office buildings that are directly exposed to the public, S4MB35, 4 mil thick security window film provides excellent safety and protection while remaining essentially unseen. Not only does the security film protect the window from breakage, it also protects your interior from harmful UV rays from the sun. It rejects about 99% of the UV rays, helping to reduce fading on your precious furniture or other UV sensitive belongings.

Provides Security and UV Protection 99% UV Rejection Rate Protect Your Family from UV Protect Furniture and Wall Pictures

OUR SECURITY & PRIVACY FILM COLLECTIONS & SPECIFICATIONS : all data values are for comparison purposes only

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.2 out of 5 stars
539

4.1 out of 5 stars
358

4.2 out of 5 stars
236

4.0 out of 5 stars
110

—

Price

$77.99$77.99 $64.99$64.99 $109.99$109.99 $159.99$159.99
—

VLT / Visible Light Transmittance
7 % 19 % 35 % 50 % 27

Shade
Extra Dark Dark Medium Light Medium Dark

UV Rejection
99 % 99 % 99 % 99 % 99 %

Total Solar Enery Rejection
37 % 33 % 28 % 24 % 79 %

Dual-Pane Friendly

✓

✓

✓

✓

Application
Inside Window Inside Window Inside Window Inside Window Inside Window

To Start : Cleaning the window & Preparation

Installing window film on a cool day and not in direct sunlight. An adjacent work surface next to the window is recommended. It will be much easier to install film on smaller windows, so we suggest starting with the smallest windows first.

It is best to clean the window with a window scraper before any installation. A window scraper is a glass safe razor blade, usually with a handle that can scrape the glass of any contaminants without scratching the glass. Using the window scraper and installation solution all over the window will clean it of any caked-on dirt that wiping will not remove. You can use the installation solution to also clean the window as well as any non-ammonia-based cleaners.

It is recommended to clean the surrounding area of the glass, like the frame and seals before installation too. Using a no lint or low lint cloth will ensure the glass will be free of any dust.

The installation solution can be made by adding 8-10 drops of liquid soap for every 16 oz of water.

Separating the Backing Liner from the Film

All window films have 2 parts. The film and the liner. Find a corner of the film to separate the liner and film. The liner will always be clear and thinner than the film.

The best way to separate the film and liner is to use two pieces of tape. Attach one piece of tape to a corner of the film, half of the tape on the film and the other half hang past the corner. Then use another piece of tape of the other side of the same corner. Both tapes should be placed slightly offset. Hold onto the two over hanging tapes and press them together to grab the film’s corner tip firmly. Then slowly separate the two pieces of tape; the liner and film should separate.

As you gently pull the liner away, spray the exposed adhesive side with the installation solution. This will make the film heavier and easier to manage, it will also prevent the film from sticking to itself or to any thing else.

When the liner is all pulled away, the film’s exposed adhesives side should be fully wet.

Handling the Sticky Window Film

Spray, spray, and spray more! You need to spray a lot and make the film fully wet and almost flooded on the film and the window glass surface. Please remember that the fully wet window and the film is one of the key factors for your successful installation without bubbles.

To handle the film easier when separating the film and the liner, spraying soapy solution liberally on the exposed adhesive side as you pull off the liner will prevent the film from being sticky. This will prevent the adhesive side from sticking to itself, eliminating potential wrinkles and bubbles during or after installation.

Also, the soapy solution should be sprayed on the top of the film prior to the squeegeeing. This will help your squeegee glide across the film

Can I remove this film later?

Your installed window film can be removed even after years. You need to soften the cured or hardened adhesive of the film to remove the film. A fabric steamer or a heat gun can heat up the film and loosen the adhesive.

Using a hairdryer can heat up the film to loosen the adhesive, but it will take longer. If there is remaining adhesive residue, it can be easily removed with soapy water and a razor blade.

Removing the static cling film is very easy and simple. The static cling film doesn’t have the adhesive and can be removed by hand.

MINIMIZE PROPERTY DAMAGE by absorbing impact from break-in attempts and holding shattered glass together.
EXCELLENT UV & HEAT REJECTION with unmatched optical clarity & transparency. Reduces fading of interior furnitures caused by the sun.
STRONG ADHESIVES to last many years. For easier installation, remember to use A LOT of soap/water mixture to soak both the adhesive side and window.
HIGH QUALITY PERFORMANCE films that are sensitive by nature. Please remember to take caution when handling the film as the slightest fold will create a permanent wrinkle.
FREE TOOLS AND EASY INSTALLATION GUIDE to make installation DIY-friendly. Make sure window surface is completely clean and absolutely free of any blemishes.